Milanoimex is jumping up onto the global stage.
Physical & chemical specs of Car-Max Not toxic, not poisonous, not volatile, not inflammable, no odor, no radioactive residues, Environmentally safe, can be drain-disposed. Specific weight : 1.0~1.1. Boiling point: 100℃ (Can be higher with antifreeze solution)
| pH value |
10~12, 12.5 (Varies with solvent amount) |
| ORP (Rel : mv) |
about -50mv ~+200mv (Varies with solvent amount) |
| Molecular size, Density |
5nm~50nm , about 0.4wt% |
| Polar discharge threshold |
Max 1Mv , 0.06mA |
| Physical appearance |
Colorless, Transparent as liquid |
Introduction of Car-Max : Carmax is a product that has regularly structured crystalline obtained by means of hydrating a certain natural earth mixture that emits high quality far-infrared radiation broke down into nano-sized particles using latest nanotechnology. The earth mixture is processed from one that contains fossilized coral reef, animal and plant plankton among others that are Cyanobacteria whose fossilization is known as Stromatolite similar to Stomatolite which dates back to Precambrian age when life on earth went through an explosive growth 4.6 billion years ago.
With Carmax you can expect

- Reduced exhaustion gas
- Greatly improved gasoline mileage
- Improved horsepower (power output) and smooth driving.
- Reduced engine noise / engine protection
- Improved air quality of car
- Prolonged life of engine oil.
- Reduction of fatigue of long distance driving.
- Health improvement of long distance driver.
Performance tested (Using dynamometer driving at IM240 mode after engine warm-up)
Testing at Motor R&D center, Aju Motor University

Gasoline mileage test | Highway field test | Testing conditions The road test was carried out in Kyungbu highway round trip using the same type of vehicle, at the same speed, time and c o n d i t i o n
- Full tank just before the start of the driving test
- Midway filling the same amount during the test
We had KBS program team with us during the testing session

Exhaustion test With Car-Max added you can see a clear sign of exhaustion gas reduction
With KBS team at the test session (7 degrees below zero) - Jan 31, 2006

Gasoline mileage result per vehicle type | Real life vehicle drive test |
Allowing some differences that existed per vehicle type, ventilation, year make, manufacturer, and serviced condition of vehicle, the rate of improvement gets better, in general, the more the age of the car, most of the cars tested had 7-47% (20% average) improvement of gasoline mileage.

Exhaustion gas test result Date of test : May 21, 2005 Place of test: xx auto-vehicle inspection center.
| Classifications |
Test Items |
Tolerances |
Before using Car - Max |
After using Car - Max |
Reduction Ratio |
| Exhaust gas |
Exhaust gas1 mode |
60 % |
48 % |
19 % |
60.4 % |
| Exhaust gas2 mode |
60 % |
32 % |
17 % |
46.9 % |
| Exhaust gas3 mode |
60 % |
19 % |
11 % |
42.1 % |
Tested vehicle : 1996 Presio diesel van / ventilation 2665cc/ mileage 11,400km Test result : 42~46% reduction rate of exhaustion compared to before addition.
| Classifications |
Test Items |
Tolerances |
Before using Car - Max |
After using Car - Max |
Reduction Ratio |
| Exhaust g |
Co |
1.2 % |
0.3 % |
0.1 % |
66.6 % |
| HC |
190.0 ppm |
216.0 ppm |
81.0 ppm |
62.5 % |
| Nox |
1440.0 ppm |
616.0 ppm |
301.0 ppm |
51.1 % |
Tested vehicle: 1994 Elantra gasoline vehicle /ventilation 1497cc/mileage 86,000km Test result: 51~66% reduction rate of exhaustion compared to before addition
The special advantage of Carmax
- The application of ceramic liquidizing technology using the world's first hydrated
form of far-infrared emitting special ceramic
- Environmentally friendly colorless, odorless, non-toxic natural material
- Continual performance until the time for coolant replacement (2-5 years)
- Works for gasoline, diesel, LPG type vehicle and also for any water-cooling machinery.
- Immediate result
- Easy to use: just pour into coolant.
Car - Max engine operation | Car-Max theory- Engine operation |

How to use Carmax
Direct addition of Carmax into the radiator is recommended (Method A) Side coolant tank addition method (Method B) can give you a delayed result because you need about 300-500km before they are sufficiently mixed and distributed. Depending on your vehicle, some cars can give you the desired mixture at 50km.
Recommended amount of usage (Standard: 5% of total coolant volume. Allowed limit: 4.8~10%)
- Vehicles with less than 3000cc ventilation, freighters below 1 Ton
category: 1 can of Carmax (320ml)
- Vehicles with 3000cc or higher ventilation, RVs, Vans: 2 cans of Carmax (640ml)
- Middle or large sized bus, medium, heavy-duty trucks: depending of the coolant list, about 7% of total coolant amount is recommended
Car - Max's maximum performance is observed at engine heat's high output stage when the coolant's circulation is high.

How Carmax works
- After Carmax is added into the radiator, the coolant changes from its clustered molecular form to an activated water form of single molecule as a result of Carmax 's high far-infrared radiation property that it has as a liquidized form of ceramic. Also Carmax's high anion production effect is added to the active coolant.
- As the engine starts operating the heat from the engine is passed to coolant in the radiator, increasing coolant 's temperature, transiting them to an activated water state. Also the heated Carmax solution (or liquid form ceramic/liquidized ceramic)
maximizes far infrared and anion production.
- After that, as the coolant circulates around the engine's cylinder, magnetic field produced by the effect of large quantity of anion present around the cylinder increases the combustion efficiency, making near perfect combustion.
Refernce
- The 11th Korea-Japan Far Infrared Symposium : Energy saving effect using far infrared radiation and anion.
- Electric field induced combustion rates increases.
- Electric field can increase combustion rate of a fire.

The function of the cooler mechanism
The combustion temperature inside the cylinder reaches 2000~2500℃, much of this heat dissipates to wall of the cylinder, cylinder head, piston valve. If the temperature of these parts gets too high, it tends to deteriorate the material's strength, causes malfunctioning, cuts life expectancy. It also eats away engine 's power output because of deteriorated combustion quality causing knocking or premature combustion. If it is cooled too much, much heat lost decreases engine efficiency causing high rate of gas consumption. Maintaining engine temperature at around 85~95℃ is the job of the cooling mechanism.

Particulars Precautions
- When the coolant's temperature is high, you are exposed to danger of burn accidents. Make sure to cool the coolant before attempting to inject Car-Max.
- Check the leakage of the coolant or use of other aggregates before using Car-Ma x .
- Be sure to study the instructions before using Car-Max.
- Avoid direct sun light and freezing temperature when storing Car-Max .
- Do not store the liquid content of Car-Max in containers other than its own.
- The Car-Ma x's liquid content consists of natural material, it is colorless, odorless, non-toxic, and does not irritate or cause damage when exposed to skin or car surface.
- If you are using cleaner or leak-avoidant in your radiator it is recommendable to change the coolant before using Car-Max .
Notes
- Plunger installed vehicles can have even better performance from Car -Max.
- New vehicles, LPG using vehicles have less dramatic effect than the gasoline, light oil using vehicles have.
- More dramatic effects seen on aged vehicles than new ones
- If your vehicle nears the time for coolant exchange it is recommended that coolant exchanged first, injecting Car-Max at the same time, for better performance and economic value.
- After Car-Max is added, the effects of Car-Max is seen after when the engine is sufficiently heated and the coolant circulating around engine, before increasing to maximum from about 200-500km(can vary depending of the type of vehicle) point and beyond.
- If the vehicle has a problematic or aging part of its internal combustion engine, you have reduced results from Car-Max. (Lower performance of thermostat, water pump, coolant temperature sensor, ATS, AFS, etc )
Car max's main composition Primary composition
- Fossils of animal, plant plankton, and reef These high quality fossils of reef of more than 5 millions years of age are processed into super fine particle powder using nanotechnology
- Marine mineral (uncontaminated sea water, deep sea water) Other effective mineral from marine mineral water (uncontaminated sea water, deep sea water) ( Ca. Mg. K. P. Na. S. C. Fe etc)
- Plant life form-mineral nexus (51 types of plant extracts) Effective earth bacterial active enzymes, Vitamins
 |
 |
| 5 million years ago:50-100m below sea level |
Now: ground level, fossil layers. |
 |
 |
| Medical herbs |
Roots (mineral composite) |
Secondary composition
 |
 |
 |
 |
 |
| B-Stone (Coral) |
|
Coral powder (5μ) |
|
Activated functional cooling water (Car-Max) |

|